 |
 |
 |
 |
- Filter in operation with all valves open.
First, cleaning of filter close A and B valves from right to left taking care to close first valve A and then valve B these upon remove plunger fitted by means of puller.
Insert the clean filter thightening the allen bolts of plunger filter. Open slowly 'A' as per mark open little discharge value 'C' wait for filling up the material in plunger as well as material should come from value C for one minute and then solve the same.
Open slowly and completely valve B again all both valves are in operations.
Please adhere to above operation procedures to ensure your flow of materials and products.
Specification Chart
|
- Special adapter for dyes and barrells side as per your specifications.
- Hand trolley for mounting the Screen Changer.
- Spare Screen packs and heaters.
- Hydraulic / Pneumatic actuation if required.
Specifications are subject to change as per your requirement or to continues developement.
- It is absolutely necccessary to filter plastic material by way of Screen Changer.
- The impurities will prevent the damage of the die & barrell and increase the life.
- The final product will be consistantly good.
- Filter mesh can be changed without Stopping the extruder line.
- Without stopping the production of the line i.e. increase the production.
- Absolutely eliminated leakage problem.
- Absolutyely eliminated idle time.
- Maximum utilization of plant.
- Elimination of material scraps ( Due to non stop work of line).
For copyright & disclaimer Site designed & hosted by Wizz O Tech